- Q & A
- How it does the job
- Delivery and Returns
Our shower filter effectively removes chlorine and other contaminants including iron, arsenic, mercury and hydrogen sulphide leaving your shower water clean and fresh.
Whether your shower is fed by a storage tank, from direct mains pressure you need to choose the Shower Filter
The Shower Filter uses a patented filtering media called KDF 55.
- This 'golden sand' is made of a special high-purity copper and zinc alloy;
- It effectively removes chlorine and other contaminants including iron, arsenic, mercury and hydrogen sulphide;
- The filter also effectively controls several types of bacteria as well as algae and fungi;
- The stainless steel mesh strainer helps filter out dirt and sediment;
- The Shower Filter has 10 to 20 times the life and effectiveness of any carbon only filter;
- Unlike carbon filters, the Shower Filter works best in warm or hot water;
- Its long life performance is a breakthrough in shower water treatment technology.
We recommend that shower filters be changed only once a year. You will be notified by a member of our staff when we believe you should change the filter.
|Dimensions||2.1/2" Diameter x 5" Length|
|Filter Media||KDF 55|
|Chlorine Removal||SH-HI 90%|
Our products and solutions are no different from any other appliance buy or home/ office improvement you make.
To help makes things easier for you, we've given a guideline on the approximate skill-level and time involved in the installation of this product:
DIY: mildly competent; ½ hour-1hour
Professional: plumber ½ hour
Please note: some of you might think you're handier than you are! This is a guideline only, intended only to help you understand how simple installation is and whom you could ask to do it for you. If you were unsure, we would recommend getting the professionals in!
If you need further advice, then please get in touch.
The Shower Filter utilises a patented filtering media called KDF 55, this media consist of finely granulated Copper and Zinc alloys and will effectively remove chlorine and other contaminants such as bacteria. The incorporation of a stainless steel mesh strainer means the added filtration of dirt and sediments.
The incorporation of the special KDF 55 media within the Shower Filter means it is able to remove contaminants such as Chlorine, Iron, Arsenic, Mercury, Hydrogen Sulphide, Algae, Fungi and dirt and sediments contained in the water.
The Shower Filter has 10 to 20 times the life and effectiveness of any carbon only filter. The life expectancy of the filter is approximately 15,000 litres, this would be between 12 to 18 months depending on the water quality.
The minimum temperature for the Shower Filter is 5 ºC and maximum being 43 ºC
The maximum water pressure for the Shower Filter is 100 psi
The Shower Filter is installed directly on to your existing shower head. Once the exisiting shower head has been removed, the Shower Filter should then be attached to an extension elbow (this should be available at any good plumbing merchants or bathroom centres. The Shower Filter will then be connected to the shower body, following this the shower hose and head can then be installed to the Shower Filter. Water should be allowed to run through the filter for one minute before first use.
The SH-LO and SH-HI Shower Filters both use the same body housing. The distinction between the two units is the media. The SH-LO utilises the KDF 55 media in a filament form, this allows the filter to dechlorinate at a much lower water pressure. As the SH-HI is designed for use on showers on direct mains pressure, the SH-HI utilises a more dense granular form of the KDF 55 media.
Here are just some of the ways it does the job:
- Each shower filter lasts roughly a year before needing replacing.
- Use fewer nasty chemicals in the shower.
- Reduces respiratory problems;
- Smoother and softer skin;
- Healthier hair;
- Fits in neatly and discreetly with your shower.
- Easy to install and simple to use.
- Made from durable plastic.
Here is a guide to delivery and returns. We are constantly looking to minimise delivery costs so some products may vary. All available delivery options will be shown in the basket and correct delivery will be calculated before you check out. You will only be charged one delivery cost.
Not all options available for all products.
To calculate accurate delivery cost to any address, please click ‘Estimate delivery cost’ above.
International deliveries: Please call us for more information on international deliveries
Collection from ItDoesTheJob.com HQ available for some products.
We think you’ll be more than happy with your purchase. If you’re not, simply return to us within 30 days.