020 8539 4707

THE ECO-STORE THAT SAVES YOU MORE

Ultrovent® Core Drill / High Rise Ventilator

Ultrovent® Core Drill / High Rise Ventilator

The Ultrovent® air brick ventilators are the ultimate in controlled passive ventilation. The unique triple action filter helps to reduce condensation, noise transmission and heat loss through the ventilation duct. Read More

Please see below for more information or contact us

£90.00 inc VAT

£75.00 ex VAT
In stock

All prices include VAT where applicable

Estimate delivery cost
  • Description
  • Technicals
  • Downloads
  • Installation
  • Q & A
  • How it does the job
  • Delivery and Returns

The Ultrovent® air brick ventilators are the ultimate in controlled passive ventilation. The unique triple action filter helps to reduce condensation, noise transmission and heat loss through the ventilation duct.

At the heart of the Ultrovent® filter is a thermal core that promotes the movement of damp air out of the property. The cavity liner is constructed from High Impact Polystyrene (HIP) to reduce cold bridging and provide increased strength and resistance to distortion.

Installation of the Ultrovent® Core Drill Ventilator requires a 127mm core drill.
The core drill & high rise ventilators can accommodate a wall thickness up to 300mm.

Note: Ultrovent air brick ventilators are NOT designed to be used in a kitchen or bathroom in place of an extractor fan.

for more guideance, glossary of terms, inspiration & advice and other information, please browse our website or feel free to contact us

 

The Ultrovent® air brick ventilators are the ultimate in controlled passive ventilation. The unique triple action filter (patent pending) helps to reduce condensation, noise transmission and heat loss through the ventilation duct.

At the heart of the Ultrovent® filter is a thermal core that promotes the movement of damp air out of the property. The cavity liner is constructed from High Impact Polystyrene (HIP) to reduce cold bridging and provide increased strength and resistance to distortion.

Installation of the Ultrovent® Core Drill Ventilator requires a 127mm core drill.
The core drill & high rise ventilators can accommodate a wall thickness up to 300mm.
 
Extension kits are available for walls of greater thickness.
 

 

Install Guide - Core Drill/ High Rise Ventilator (Click to zoom) (Install_Guide_-_Core_Drill-_High_Rise_Ventilator.pdf, 439 Kb) [Download]

Our products and solutions are no different from any other appliance buy you make.

To help makes things easier for you, we've given a guideline on the approximate skill-level and time involved in the installation of this product:

DIY: Retrofitting to existing hole; 45 minutes. Creating and installing into a new hole; 1 day.

Professional: Retrofitting to existing hole; 30 minutes. Creating and installing into a new hole; 3/4 day.

Please note: some of you might think you're handier than you are! This is a guideline only, intended only to help you understand how simple installation is and whom you could ask to do it for you. If you were unsure, we would recommend getting the professionals in!

 

Installation Guide

Below is a step-by-step guide on how to install the Ultrovent Core Drill/ High Rise Ventilator, for a download of this click here.

 

1. Choose a suitable location for the Ultrovent.
2. Create a suitable aperture through the wall.
3. Place filter into the centre of the cavity liner.
4. Connect outer cowl into the cavity liner.
5. Position Ultrovent through the wall aperture.
6. Insert internal grill into the cavity liner.

 

1. Choose a suitable location for the Ultrovent.
Installation should be through an external wall towards an upper or lower corner of the room.

 

2. Create a suitable aperture through the wall.
127mm core drill is required.

 

3. Place filter into the centre of the cavity liner.
Red strip uppermost and label visible from inside the room (White grilled casing showing inside the room).

 

4. Connect outer cowl into the cavity liner.

 

5. Position Ultrovent through the wall aperture.
Cut liner to required length. Seal to external brickwork as necessary.

 

6. Insert internal grill into the cavity liner.
Seal liners together with mastic if required. Push grill firmly against internal plasterwork.

 

Clean filter with a damp cloth and replace every 2 years.

To purchase replacement filters for the Core Drill/ High Rise Ventilator click here.

 

Nobody's asked us any questions yet, to be the first by contacting us.

Here are just some of the ways it does the job:

Economic:

  • No running costs as it’s passive;
  • By reducing the drafts you don’t have to pump as much heat into the room;
  • By combating damp, you don’t have the costs of fixing it.

Better Consumption:

  • Reduces cold draughts.
  • Uses no power to run.
  • Reduces noise transmission.

Feel good:

  • Fights condensation;
  • Discreet and can fit in with the decorative air vents you may already have in place;  
  • Silent in operation.

Simple:

  • Easy to retrofit with the flexibility to easy reduce or extend the length;
  • Filter easily removes for cleaning/replacing.

Reliable:

  • No working parts so you can fit and forget;
  • Extendable casing to provide an accurate fit on a range of thicknesses;
  • Standard ventilator size so retrofit with ease.

Delivery

Here is a guide to delivery and returns.  We are constantly looking to minimise delivery costs so some products may vary.  All available delivery options will be shown in the basket and correct delivery will be calculated before you check out.  You will only be charged one delivery cost.   

Not all options available for all products.

To calculate accurate delivery cost to any address, please click ‘Estimate delivery cost’ above.  

International deliveries: Please call us for more information on international deliveries

Collection from ItDoesTheJob.com HQ available for some products. 


Returns
We think you’ll be more than happy with your purchase.  If you’re not, simply return to us within 30 days.  
 

Read more about Delivery and Returns